Transmission Mount
The transmission mount works alongside the engine mounts. If one fails first, the other is usually not far behind. Joel checks both in the same inspection so you don't come back in two months for the other half of the job.
Houston Local
4.6 from 46 Google reviewsMotor Mount Replacement in Houston
Excessive engine vibration and clunking often point to worn mounts, Joel can diagnose and replace them the same day.
- Mon–Sat: 8:30 AM–6 PM
- Houston, TX
Hover the car to X-ray itTap a part to X-ray it
What does your car need?
Engine01 / 08 General Mechanic · Motor Mount See 2 services
Brakes02 / 08 Brake Caliper · Brake Rotor See 2 services
Suspension03 / 08 Ball Joint · Control Arm · Shock Absorber +2 See 5 services
Steering04 / 08 Center Bar Link · Idler Arm · Pitman Arm +3 See 6 services
CV Axle05 / 08 CV Axle View service
A/C06 / 08 Auto Air Conditioning · Car AC See 2 services
Electrical07 / 08 Auto Electrical View service
Alignment08 / 08 Wheel Alignment View service
Overview
Houston Motor Mount Replacement Done Right
Motor mount replacement in Houston is one of the more misdiagnosed jobs in auto repair, and Gomez Auto Repair Services LLC at 152 W Mt Houston Rd handles it correctly from the start. If your engine shudders at idle, clunks when you shift into drive, or the whole car vibrates at a stoplight, those aren't engine problems in most cases. They're worn mounts. Joel diagnoses the difference before anything gets pulled apart. Call (832) 991-9850 and describe what you're feeling; he'll tell you straight whether it's the mounts or something else.
Houston's climate is genuinely harder on motor mounts than most of the country. Rubber degrades faster when it cycles through extreme heat every day, and our humidity works into the metal brackets over time. Add the stop-and-go traffic on the Westheimer Corridor and the potholes throughout Alief and Gulfton, and you've got a combination that chews through mounts well ahead of the national average service life. The replacement process itself involves supporting the engine safely, removing the old mount hardware, cleaning the mount area, and torquing the new mounts to spec, not something to rush. Labor time varies by vehicle make, model, and how many mounts need replacing; some vehicles have two, some have three or four. Cost depends on the number of mounts, your vehicle's accessibility, and the parts required. Every job is different, contact Gomez Auto Repair Services LLC for an accurate estimate.
Joel Antonio Gomez DuarteOwner · answers the phone(832) 991-9850
Signs Your Motor Mounts Are Failing
These symptoms show up before the damage spreads to other components.
Vibration at Idle
If the engine shakes noticeably when you're sitting still at a red light, a worn mount is the first thing to check. A healthy mount absorbs that vibration. A failed one lets it travel straight into the cabin.
Clunking on Gear Changes
That thunk you feel when you shift from park to drive or reverse is the engine moving more than it should. The mount's job is to hold the engine in position during torque changes. When it can't, you hear it.
Engine Visibly Moving
Pop the hood and have someone rev the engine while you watch. If the engine rocks dramatically instead of holding steady, the mount is gone or nearly gone. Don't wait on this one.
Increased Road Noise
Failed mounts transfer more vibration to the chassis, which amplifies road noise inside the cabin. Drivers often assume it's a tire or exhaust issue first, but it's worth checking the mounts early.
Pulling During Acceleration
If the car tugs to one side when you accelerate hard, an uneven mount collapse on one side of the engine can cause it. It's easy to confuse with an alignment issue, but the fix is completely different.
The Process
How Joel Replaces Motor Mounts
Confirm the Diagnosis
Joel inspects the mounts visually and physically, checking for cracked rubber, collapsed metal, or fluid leaks in hydraulic mounts. He rules out other drivetrain causes before any parts get ordered, so you're not paying for a repair that doesn't fix the problem.
Support and Remove
The engine gets supported safely with a jack before the mount bolts are loosened. This keeps everything aligned while the old hardware comes out. Skipping this step is how engines shift out of position and create a bigger problem.
Install and Torque to Spec
New mounts go in and every bolt gets torqued to the manufacturer's specification, not just tight enough to feel good. After installation, Joel checks the engine position and confirms the repair eliminated the vibration before the car leaves the shop.
Why It Matters
Delaying Motor Mount Replacement Costs More
A lot of drivers let this one slide because the car still moves. That's a mistake. When a mount is fully collapsed, the engine can shift enough to put stress on other components it was never meant to contact. Radiator hoses, the AC compressor, power steering lines, and even the strut mounts can take damage when the engine moves out of its designed position. In severe cases, CV axles and control arms see extra stress because the drivetrain geometry changes slightly. The honest answer is: if Joel tells you the mount needs replacing, do it on that visit. The car's sitting on the lift already.
What Joel Checks Alongside the Mounts
Motor mount failure rarely happens in total isolation. These related items get eyeballed during the same inspection.
CV Axle Condition
Engine movement from bad mounts puts side-load stress on the CV axles over time. Joel looks at the axle boots and joints while the underside is accessible. Catching a cracked boot early prevents a full CV axle repair later.
Call to bookSteering and Suspension Components
If you came in for vibration and the mounts look okay, the problem might be in the control arms or sway bar links. Joel doesn't stop at the first plausible answer, he confirms it.
Call to book- Transmission mount condition
- CV axle boots for cracking or grease loss
- Control arm bushings for wear
- Sway bar links for looseness
- Radiator and AC hose routing near the engine
46 Reviews. One Owner. No Runaround.
Joel Antonio Gomez Duarte is the person who answers the phone and the person doing the work.
- 4.6 stars across 46 Google reviews
- Real customers from Southwest Houston, Alief, and Gulfton
- Open Monday through Saturday, 8:30 AM to 6:00 PM
- Six days a week, more access than most dealerships
- Se Habla Espanol
- Bilingual shop serving Houston's West Side and Southwest
- Same-day diagnosis on most motor mount jobs
- Call first to confirm availability for your vehicle
Straight from Google
What Houston Drivers Say About Joel
4.6
46 verified Google reviewsHighly recommend this place. Owner very knowledgeable and courteous, and quoted me price beforehand, and fixed that same day! They have a waiting area to sit and watch tv.
Yvette GarzaDon't hesitate to go to this place, I've finally found an honest mechanic
Hector DuranGreat service, and they are very friendly and reliable.
fernando velascoJoel is assume go see him!! Pricing is GREAT!!
Ratonda IrbyGo my alignment done and they also gave me a helpful advice on my tire rings very much recommend and it’s cheap too
Dhruv PatelYou can be comfortable bringing your car to Gomez. I had an alignment done. He was able to get it in top shape after I had my whole suspension system replaced.. He’s also very kind and price friendly. Thank you Mr. Gomez.
ossports19 smithMr. Gomez was honest and truly a godsend. I knew coming in that I would need to have major work done on my vehicle. He showed me the problems and explained in detail what needed to be done. It is always a challenge going to get mechanic work done as being a woman. I felt at ease and grateful for his expertise. I definitely will bring my family vehicles from no on.
V CruzExcellent shop. Got my front suspension fix in good time and price.
Miguel silvasNo reviews on this topic yet.
Engine Vibration? Call Joel Today.
Don't let a worn motor mount turn into a drivetrain repair. Gomez Auto Repair Services LLC is open Monday through Saturday, 8:30 AM to 6:00 PM, at 152 W Mt Houston Rd in Houston. Call (832) 991-9850 and describe the symptoms, Joel will tell you what it needs.
Shop hours
- MonToday 8:30 AM–6 PM
- TueToday 8:30 AM–6 PM
- WedToday 8:30 AM–6 PM
- ThuToday 8:30 AM–6 PM
- FriToday 8:30 AM–6 PM
- SatToday 8:30 AM–6 PM
- SunToday Closed
Frequently asked questions
How do I know if my motor mounts are failing?
The clearest signs are engine vibration at idle, a clunking sound when you shift from park into drive or reverse, and visible engine movement when someone revs it with the hood open. Some vehicles also pull to one side under hard acceleration when a mount has fully collapsed on one side. If you're feeling any of these, call (832) 991-9850 and describe it, Joel can usually narrow it down before the car even comes in.
Can I drive with bad motor mounts?
Technically yes, but it's not a good idea for long. A fully collapsed mount lets the engine shift position, which puts stress on hoses, CV axles, and anything else routed close to the engine. The vibration also accelerates wear on other suspension and drivetrain components. If the mount is gone rather than just worn, the risk of contact damage increases every day you delay.
What causes motor mounts to fail faster in Houston?
Houston's heat is the main factor. Rubber compounds in the mount degrade faster when they're cycling through extreme temperatures daily. High humidity works into the metal brackets and accelerates corrosion. Add the constant stop-and-go on major corridors and the road conditions through Alief and Sharpstown, and Houston drivers tend to see mount wear earlier than the national average service life suggests.
How long does motor mount replacement take?
Most single-mount replacements take two to three hours depending on the vehicle. If two or more mounts need replacing at the same time, which is common since they age together, the job takes longer. Vehicles with tight engine bays or complex subframe setups take more labor time than straightforward truck or SUV applications. Joel can give you a time estimate once he confirms how many mounts your vehicle needs.
Is motor mount failure different from an engine problem?
Yes, and it's one of the most common misdiagnoses in the shop. A rough-running engine and a collapsed motor mount both cause vibration, but the fix is completely different. Joel checks the mount condition before assuming the engine itself is the source of the problem. Replacing mounts on an engine that's actually misfiring won't solve anything, and chasing engine problems when the mount is gone wastes time and money.
How much does motor mount replacement cost?
The cost depends on how many mounts need replacing, your vehicle's make and model, and how accessible the mounts are on that specific engine layout. A compact sedan with one accessible mount is a different job than a truck with three mounts and a tight frame clearance. Every job is different, contact Gomez Auto Repair Services LLC at (832) 991-9850 for an accurate estimate.
Will a bad motor mount affect my wheel alignment?
Not directly, but engine movement from a collapsed mount can affect the geometry of components connected to the drivetrain. If a mount failure has gone on long enough to shift the engine out of position, it's worth having a wheel alignment check done after the mounts are replaced, especially if the car has also been pulling or tracking unevenly.
Related
Next step
Tell us about the job
Your name, your number and what needs doing. A person from Gomez Auto Repair Services Llc gets back to you.
Rather talk now?(832) 991-9850Mon–Sat: 8:30 AM–6 PM · Sun: Closed